Kramer Electronics VP-1608 - Manual (Page 27)

VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix 23
7.7.1 Resetting to the Current Status
You can reset the VP-1608 unit to the current status (reloads the current setup)
To reset a VP-1608 unit to the current status, do the following:
• Press INPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to the current status, momentarily displaying the
unit characteristics, as described in
Section 7.8 . In addition, the unit
characteristics also appear immediately (and automatically) after switching
on the power
7.7.2 Resetting to the Factory Default State
You can reset the VP-1608 unit to the factory default state.
To reset a VP-1608 unit to the factory default state, do the following:
• Press OUTPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to its factory default state, momentarily displaying
the unit characteristics, as described in
Section 7.8
7.8 Displaying Unit Characteristics
Switching on and/or resetting to the Current Status (see Section 7.7.1 ) or to the
Factory Default State (see Section 7.7.2 ), the VP-1608 unit momentarily displays
the following characteristics on the front panel (as Figure 10 illustrates):
• The number included in the product name (for example, 1608)
• The firmware version number
Figure 10: VP-1608 Unit Characteristics