3 upgrading the firmware, Upgrading the firmware, Figure 12: splash screen – Kramer Electronics VP-1608 User Manual
Page 29: Figure 11
Advertising
VP-1608 - Flash Memory Upgrade
25
Figure 11: VP-1608 Underside Flash Program Switches Set for Upgrade
8.3
Upgrading the Firmware
To upgrade the firmware, follow these steps:
1. Double-click the desktop icon: “Shortcut to FLIP.EXE”.
The Splash screen appears as follows:
Figure 12: Splash Screen
2. After a few seconds, the Splash screen is replaced by the “Atmel – Flip”
window:
Advertising