Kramer Electronics VP-201xl - Manual (Page 4)

Your VP-201xl 2x1 High Resolution VGA Switcher
KRAMER ELECTRONICS, LTD.
2
a strip line designed PCB, together with high quality switching components and
careful circuit design, that ensure very high bandwidth exceeding 1300 MHz
(1.3GHz!) and minimal crosstalk
Accepts 2 inputs and lets you select either input using a switch located on
the front panel
With its passive design, eliminates the need for a power supply, and
makes it possible to operate “backwards” (as a 1x2 switcher), by taking a
single input and toggling between two displays
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your Kramer VP-201xl in a
location free from moisture and away from excessive sunlight and dust
4 Your VP-201xl 2x1 High Resolution VGA Switcher
Figure 1 and Table 1 define the VP-201xl:
Figure 1: VP-201xl 2x1 High Resolution VGA Switcher
Table 1: Features and Functions of the VP-201xl 2x1 High Resolution VGA Switcher
# Feature Function
1 INPUT 1 / OUT 1 HD15F Connector Connects to the video source 1 or to the video acceptor 1
2 OUTPUT / INPUT HD15F Connector Connects to the video acceptor or to the video source
3 INPUT 2 / OUT 2 HD15F Connector Connects to the video source 2 or to the video acceptor 2
4 SELECT Switch
Push in to select input 2/out 2; release to select input 1/out 1