Kramer Electronics VP-201xl - Manual (Page 6)

Technical Specifications
KRAMER ELECTRONICS, LTD.
4
2. Connect the OUTPUT HD15F connectors to up to 2 VGA acceptors, as
follows:
INPUT 1 / OUT 1 to an acceptor (for example, a monitor “Acceptor 1”)
INPUT 2 / OUT 2 to an acceptor (for example, a monitor “Acceptor 2”)
3. Push in the SELECT switch to route the source signal to Acceptor 2 (at
input 2), or release it to route the source signal to Acceptor 1 (at input 1).
Figure 3: Connecting the VP-201xl as a 1x2 High Resolution VGA Switcher
6 Technical Specifications
Table 2 includes the technical specifications:
Table 2: Technical Specifications
1
of the VP-201xl 2x1 High Resolution VGA Switcher
INPUTS: 2 analog red, green, blue signals - 0.7 Vpp/75 , H & V sync, TTL level, on
HD15F connectors
OUTPUT: 1 analog red, green, blue signals - 0.7 Vpp/75 , H & V syncs, TTL level, on an
HD15F connector
BANDWIDTH (-3dB): >1300 MHz
DIMENSIONS:
12 cm x 7.5 cm x 2.5 cm (4.7" x 2.95" x 0.98") W, D, H
WEIGHT: 0.26 kg. (0.58 lbs.) approx.
ACCESSORIES: Mounting bracket
1 Specifications are subject to change without notice