Kramer Electronics VS-1616A User Manual
User manual, Kramer electronics, ltd, Model
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Your Balanced Stereo Audio Matrix Switcher
- 5 Installing the VS-1616A in a Rack
- 6 Installing the Balanced Stereo Audio Matrix Switcher
- 6.1 Connecting the Balanced/Unbalanced Stereo Audio Input/Output
- 6.2 Operating a Single Machine
- 6.3 Assembling a Multi-channel Audio Switcher
- 6.4 Assembling an Expanded Matrix Switcher
- 6.5 Assembling a System of Interconnected Switchers
- 6.6 Setting the DIP-switches
- 6.7 Connecting a Control Interface
- 6.7.1 Connecting the RS-232 Control Interface
- 6.7.1.1 Connecting Two VS-1616As with a Null-modem Adapter
- 6.7.1.2 Connecting Two VS-1616As without a Null-modem Adapter
- 6.7.1.3 Connecting to a 9-pin D-sub COM Port with a Null-modem Adapter
- 6.7.1.4 Connecting to a 9-pin D-sub COM Port without a Null-modem Adapter
- 6.7.1.5 Connecting to a 25-pin D-sub COM Port with a Null-modem Adapter
- 6.7.1.6 Connecting to a 25-pin D-sub COM Port without a Null-modem Adapter
- 6.7.2 Connecting the RS-485 Control Interface
- 6.7.1 Connecting the RS-232 Control Interface
- 6.8 Configuring the Sync
- 6.9 Connecting the KEYBOARD EXTENSION
- 7 Operating Your Balanced Stereo Audio Matrix Switcher
- 8 Viewing the MENU Commands Sequence
- 8.1 Locking and Unlocking the Front Panel
- 8.2 Choosing the Follow-System or Breakaway-from-System Mode
- 8.3 Setting the MACHINE ADDRESS
- 8.4 Choosing the SWITCHING METHOD Setting
- 8.5 Choosing the Extended Keyboard Setting
- 8.6 Setting the STORE/RECALL KEYBOARD Mode
- 8.7 Choosing What to INDICATE
- 8.8 Choosing the COMMUNICATION Setting
- 8.9 Setting the IR REMOTE Control
- 8.10 Choosing the AUTO STORE Current SETUP
- 8.11 Identifying the MACHINE
- 8.12 Choosing the Initial RESET
- 9 Upgrading the Flash Memory
- 10 Technical Specifications
- 11 Communication Protocol
- 12 ASCII Protocol