Kramer Electronics VS-1616A - Manual (Page 46)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Viewing the MENU Commands Sequence
42
10. Press the TAKE button again.
The MATRIX Display shows the message:
HIGHEST MACHINE ADDRESS
Changed
8.3.2 Changing the MACHINE ADDRESS from a Large Matrix to
Standalone
To set the MACHINE ADDRESS:
1. Press the MENU button until you reach the MACHINE ADDRESS
command.
The MATRIX Display shows the message:
MACHINE ADDRESS
setting yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
OUTkey 1: Stand-Alone UNIT
2: Large Matrix
Current
Matrix
1
3. Press the OUT button # 1.
The Displays show the messages:
STAND ALONE UNIT (Mach# 01)?
Press TAKE to confirm
Current
Matrix
4. Press the TAKE button again.
The MATRIX Display shows the message:
MACHINE ADDRESS changed
now STAND-ALONE
8.3.3 Changing the a Large Matrix Setting MACHINE ADDRESS
To set the MACHINE ADDRESS:
1. Press the MENU button until you reach the MACHINE ADDRESS
command.
The MATRIX Display shows the message:
MACHINE ADDRESS setting
yes -> TAKE, next -> MENU
1 Indicating that the machine is not set to stand alone