Kramer Electronics VS-169TP - Manual (Page 37)

Technical Specifications
33
11 Technical Specifications
The VS-169TP technical specifications are shown in Table 6:
Table 6: VS-169TP Technical Specifications
1
SIGNAL INPUTS: 16 CAT 5 remote transmitters on RJ-45 connectors
2 local RGBHV UXGA on 15-pin HD connectors
2 local stereo analog audio on 3.5mm mini connectors
2 local RS-232 controllers on 9-pin D-sub connectors
SIGNAL OUTPUTS: 8 CAT 5 remote receivers on RJ-45 connectors
1 local RGBHV UXGA on a 15-pin HD connector
1 local stereo analog audio on a 3.5mm mini connector
1 local RS-232 controllers on a 9-pin D-sub connector
CONTROL INPUTS/OUTPUTS: 1 RS-232 Input on a 9-pin D-sub connector
1 RS-232 Output on a 9-pin D-sub connector
1 RS-485 Input/Output on a 3-pin detachable terminal block
1 Ethernet Input/Output on an RJ-45 connector
RESOLUTION (VIDEO): Up to WUXGA; HD compatible
SAMPLE RATE (AUDIO): 24bit, 48kHz
BAUD RATE (RS-232): Up to 19200
CONTROL (LOCAL VIDEO OUT): EQ: 0 to +33dB @50MHz; Level: -7.5dB to +4.4dB; H & V polarity
S/N RATIO (AUDIO):
>80dB
THD+N (AUDIO): < 0.03%
OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE: –40° to +70°C (–40° to 158°F)
HUMIDITY: 10% to 90%, RHL non-condensing
POWER SOURCE: 100-240VAC, 50-60Hz; 36VA (500mA maximum)
DIMENSIONS: 19" x 7" x 2U W, D, H
WEIGHT: 3.8kg (8.4lbs) approx
ACCESSORIES: Power cord, rack “ears”, Windows®-based control software, remote control
transmitter
OPTIONS: External remote IR receiver cable
12 Hex Table
Table 7 lists the Hex values (which the protocol in Section 13 describes in
more detail) for the VS-169TP:
1 Specifications are subject to change without notice