Kramer Electronics VS-6464DN - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 Defining EDID 4
3.2 About the Power Connect™ Feature 4
3.3 Recommendations for Best Performance 5
3.4 Redundant Power Supplies 5
4 Defining the VS-6464DN 64x64 Digital Matrix Switcher 5
4.1 Using the IR Transmitter 9
5 Installing the VS-6464DN in a Rack 10
6 Connecting the VS-6464DN 64x64 Digital Matrix Switcher 11
6.1 Port Numbering 12
6.1.1 Port Switching and EDID Numbering Examples 13
6.2 Connecting to the VS-6464DN via RS-232 14
6.3 Connecting to the VS-6464DN via Ethernet 14
6.3.1 Connecting the Ethernet Port directly to a PC 14
6.3.2 Connecting to the Ethernet Port via a Network Switch/Hub 16
7 Operating Your Video Matrix Switcher 17
7.1 Startup Display 17
7.1.1 Viewing the Display 17
7.2 Using the Selector Buttons 18
7.3 Confirming Actions 18
7.3.1 Toggling between the At Once and Confirm Modes 19
7.3.2 Confirming a Switching Action 19
7.4 Switching Actions 19
7.4.1 Switching one Input to one Output 19
7.4.2 Switching Several Inputs to Several Outputs 20
7.4.3 Turning an Output Off 20
7.4.4 Turning Off Several Outputs 21
7.4.5 Recalling the Default Setup 21
7.5 Locking the Front Panel Buttons 22
8 Using the Configuration Menu 22
8.1 Using the Setup Menu 22
8.1.1 Setup Menu—1: inXX=>ALL, Switching one Input to all Outputs 23
8.1.2 Setup Menu—3: outXX=>OFF, Turning an Output Off 23
8.1.3 Setup Menu—7: EDID, Assignment to an Input 23
8.1.4 Setup Menu—9: Delay, Setting for an Output 24
8.1.5 Setup Menu—4: store setup XX, Storing the Setup in a Preset 25
8.1.6 Setup Menu—6: recall setup XX, Recalling a Preset 26