Kramer Electronics VS-66HDCPxl - Manual (Page 21)

18 VS-66HDCPxl - Operating the VS-66HDCPxl 6x6 DVI Matrix Switcher
6.4 Acquiring the EDID
You can acquire the EDID from:

One output set to one or more of the six inputs (see Section 6.4.1 )

Different outputs set to different inputs (see Section 6.4.2 )

The default EDID (see Section
6.4.3
)
6.4.1 Acquiring an EDID from a Single Connected Output
To acquire or change the EDID of a new output display:
1. Connect the required acceptor to the output from which you want to acquire
the EDID.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the IN SELECT button to which the EDID is to be copied.
The selected input number flashes on the display.
4. Select the OUT SELECT button from which the EDID is to be acquired.
5. Press the EDID button.
The EDID has been captured when the display returns to normal.
6.4.2 Acquiring an EDID from Several Sets of Inputs and Outputs
To acquire the EDID from several sets of inputs and outputs (for example, OUT 1
to IN 1 and OUT 6 to IN 3):
1. Connect the required acceptors to the outputs from which you want to
acquire the EDID.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.