Kramer Electronics VS-84H - Manual (Page 18)

Upgrading the Firmware
15
6. Select Use the following IP Address, and fill in the details as shown in
Figure 5 .
7. Click OK.
Figure 5: Internet Protocol (TCP/IP) Properties Window
7.6.2 Connecting the Ethernet Port via a Network Hub
You can connect the Ethernet port of the VS-84H to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45
connectors.
8 Upgrading the Firmware
For instructions on upgrading the firmware see the “STC Firmware
Upgrade” document.