Kramer Electronics VS-88SDI - Manual (Page 18)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-88SDI
14
straight-through cable (see section 6.5.2 )
6.5.1 Connecting the ETHERNET Port Directly to a PC (Crossover
Cable)
You can connect the Ethernet port of the VS-88SDI to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP address
1
After connecting the Ethernet port, configure your PC as follows:
of the VS-88SDI during the initial configuration
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 4 ).
Figure 4: Local Area Connection Properties Window
1 The default IP address is 192.168.1.39