Kramer Electronics VS-88SDI - Manual (Page 19)

Connecting the VS-88SDI
15
15
6. Select Use the following IP Address, and fill in the details as shown in
Figure 5 .
7. Click OK.
Figure 5: Internet Protocol (TCP/IP) Properties Window
6.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-88SDI to the Ethernet port on
a network hub or network router, via a straight-through cable with RJ-45
connectors.
6.6 Configuring the Ethernet Port
To configure the Ethernet port, download the Device Properties Ethernet
configuration software. Extract the file to a folder and create a shortcut on
your desktop to the file.
Follow these steps to configure the port:
1. Double click the desktop icon.
The Connect screen appears as follows: