Kramer Electronics TP-107AV - Manual (Page 23)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring a TP-107V / TP-107AV System
20
5.5 Connecting via the RS-485
You can interconnect the TP-107AV units together with an RC-108/RC-116
controller via RS-485 communication (using the C-STP+KNET-6 cables), as
illustrated in Figure 17.
K-NET (RS-485) PINOUT
GND
Green
Black
Red
White
+12V
+
- B
A
Figure 17: Wiring the RS-485 Connector
5.6 Setting the Dipswitches of the TP-107AV
Figure 18 and Table 13 define the factory default dipswitches:
OFF
ON
1 2 3 4 5 6 7 8
Figure 18: Dipswitch Settings
Table 13: Dipswitch Setting Features
DIPS Description
1, 2, 3, 4 Set the machine number for each TP-107AV/TP-107V in the chain (see Table 14)
5, 6, 7 Not used
8 Set to ON for a standalone unit
Set to OFF when in slave mode