Kramer Electronics FC-29 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Upgrading Firmware
8
5.3 Exporting the IR Commands
You can save the IR commands as a driver file. To do so, click the Export
Driver button and save the file. The default file name includes the names of the
vendor and the device, as well as the revision. You can then upload the learned
commands to multiple room controllers by importing the saved driver file.
6 Upgrading Firmware
To upgrade the firmware:
1. Open the Device menu and click Load Firmware.
2. In the Load Firmware Upgrade window, open the Firmware file and then select
the FC-29 from the Machine drop-down list:
Figure 8: Load Firmware Upgrade Window
3. Connect the PC to the FC-29 via the USB connector.
4. Click the Connect button and select USB as the connection method, select the
port and click OK.
Figure 9: Connect Window