Kramer Electronics FC-29 - Manual (Page 11)

Technical Specifications
9
5. Click the Start Upgrade button (see Figure 8).
The upgrading process takes a few seconds, during which:
The computer recognizes a new drive
A new window opens that includes the file “Firmware.kbn”
After a few seconds, the file name changes to NewFirmware.kbn
6. When the following message appears: “Firmware upgrade successfully done,
please safely remove the device”, disconnect the USB cable from the FC-29.
7 Technical Specifications
Table 2 defines the technical specifications:
Table 2: Technical Specifications
1
of the FC-29
INPUT: 1 IR Receiver
OUTPUTS: 1 IR emitter on a 3.5mm mini connector
POWER SOURCE: 5V DC (USB), 120mA
DIMENSIONS: 4.22cm x 5.18cm x 2.44cm (1.66" x 2.04" x 0.96") W, D, H
WEIGHT: 0.15kg (0.55lbs) approx.
ACCESSORIES: Power Supply
1 Specifications are subject to change without notice