Kramer Electronics WP-501 - Manual (Page 101)

96 K-Config - Using the Triggers
3. Click OK and add actions to the trigger (see Section 9 ):
Figure 174: Sub Routines – Set the Action Group Trigger Name
In this example, the subroutine includes power down of the input sources and it can be incorporated into daily
and/or weekly shutdown triggers, GPI/O events (temperature alarm, for example), and so on. This sequence of
commands will not have to be written again and again for specific triggers and can be used as a sub routine
within a trigger as required.
4. Open or create an Event Trigger (for example, one of the built-in Custom Events, All Off)
5. In the Action Editor select Sub Routines and add the Sub Routine see Figure 175 .
Figure 175: Sub Routines – Selecting the Action Group Trigger in the Action Editor