10 kramer protocol 3000, 1 protocol 3000 syntax, Kramer protocol 3000 – Kramer Electronics PL-50 User Manual
Page 40: Protocol 3000 syntax, Communication protocol, Device message format, Device long response ( echoing command )
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol 3000
36
10 Kramer Protocol 3000
The Ethernet/USB/RS-232/RS-485
communication protocol
10.1 Protocol 3000 Syntax
lets you control
the machine from any standard terminal software (for example, Windows®
HyperTerminal Application).
Host message format:
Start Address (optional)
Body
Delimiter
#
Destination_id
@
message
CR
Simple command (commands string with only one command without
addressing):
start
body
delimiter
#
Command SP Parameter_1,Parameter_2,…
CR
Commands string (formal syntax with commands concatenation and
addressing):
Start
Address
Body
Delimiter
#
Destination_id
@
Command_1 Parameter1_1,Parameter1_2,…|
Command_2 Parameter2_1,Parameter2_2,…|
Command_3 Parameter3_1,Parameter3_2,…|…
CR
Device message format:
Start
Address (optional)
Body
Delimiter
~
Sender_id@
message
CR LF
Device long response (Echoing command):
Start Address (optional)
Body
Delimiter
~
Sender_id@
command
SP
[
param1 ,param2
…]
result
CR
LF
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
SP = Space (ASCII 32 = 0x20)
1 RS-232/RS-485 use a data rate of 115200 baud, with no parity, 8 data bits, and 1 stop bit
2 Not available at the time of printing. Refer to our Web site at
http://www.kramerelectronics.com
for details