Kramer Electronics RC-13TC - Manual (Page 10)

8 RC-13TC - Using Your Video Transport Controller
5.2 The RC-13TC as an Auxiliary Control Panel
When the RC-13TC is used as an auxiliary control panel, as illustrated in Figure 5 :
• It requires only a K-NET connection to another auxiliary device
• A power supply unit is not required as the K-Net connection carries the
power supply
Power supplies are sold separately. Consult your Kramer dealer for details.
• No programming of the auxiliary panel is needed
• Depending on the setup, the device ID may need setting using the K-Config
application
• The RS-232 and IR ports may be used to control devices
5.2.1 Connecting Multiple RC-13TC Devices as System Controllers
Connect the RC-13TC devices to the SV-552 as illustrated in Figure 5 .
Figure 5: RC-13TC Connections when used as part of a K-NET System
5.2.2 Setting the K-NET Termination
The first and last physical devices on a K-NET bus must be terminated (in this
example, devices 1 and 3).