Kramer Electronics RC-8iR - Manual (Page 36)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Creating a Macro
32
10.2.2 The Driver Command – Switch a DVD Player to the Projector
This section applies to Serial (RS-232, RS-485) and ETH commands, as well
as the VP-23RC (internal) command, specific to the VP-23RC machine.
To add a Driver command to a macro (for example, to switch the DVD player
to the projector
1
1. Open the Kramer RC Configuration main window.
), do the following:
2. Select a button from the RC buttons layout and label it “DVD”.
3. Click the New button (in the Macro area).
4. In the RC command area, write the command description (for example,
Projector -- Input B (DVD)).
5. Open the Port drop down box and select the relevant port
2
6. Select the Driver command (for example, “switch”) from the drop down box.
from the list.
The default driver associated with this port appears (or you can select a new
one and then update the port manager).
The Command Bytes area shows the command string.
Figure 33 illustrates the Button Macro display box and the RC Command area
as it appears after writing the driver command:
1 In this example, the projector driver was added manually via the New buttons in the Driver Manager window
2 Once the port is selected, the default driver details appear