Kramer Electronics RC-8iR - Manual (Page 10)

Installing the RC-8IR Universal Room Controller
7
5.2 Mounting the Device Housing
The device housing is mounted to the wall via the two housing mounting
screws holes, as illustrated in Figure 6:
Figure 6: Mounting the Device Housing
5.3 Mounting the RC-8IR Faceplate
1. Place the faceplate on the RC-8IR so that the two screw mounting holes
are aligned (see Figure 7 ).
2. Insert the two mounting screws and tighten with a screwdriver.
Figure 7: Mounting the Faceplate