Kramer Electronics SV-552ALC - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
PART I Your SummitView™ System 2
3 Overview 2
3.1 Basic SummitView™ SV-552 Installation 2
3.2 Shielded Twisted Pair and Unshielded Twisted Pair 3
3.3 8-Step SummitView™ Basic System Quick Installation Guide 4
PART II The SV-552 SummitView™ Processor/Switcher 6
4 Defining the SV-552 Processor/Switcher 6
4.1 DDC Support 9
PART III Detailed Installation Instructions 10
5 Connecting the SV-552 SummitView™ Processor/ Switcher 10
5.1 Connecting the SV-552 Processor/Switcher 10
5.2 Operating the SV-552 Processor/Switcher Remotely 11
5.3 Installing the SV-552 in a 19” Rack (Optional) 12
6 The RC-63DL Room Controller 13
6.1 Defining the RC-63DL 13
6.2 Connecting the Room Controller 15
7 Defining and Connecting the Wall Plates 16
7.1 Defining the Wall Plates (U.S.) 17
7.1.1 Defining the SV-301xl (U.S.) 17
7.1.2 Defining the SV-302 (U.S.) 19
7.1.3 Defining the SV-306 (U.S.) 20
7.1.4 Defining the SV-307 (U.S.) 21
7.2 Defining the Wall Plates (England and Europe) 22
7.2.1 Defining the SV-301xl (England and Europe) 22
7.2.2 Defining the SV-302 (England and Europe) 23
7.2.3 Defining the SV-306 (England and Europe) 24
7.3 Connecting the Wall Plates to the SV-552 25
7.3.1 Connecting the SV-301xl Wall Plate to the SV-552 25
7.3.2 Connecting the SV-302 Wall Plate to the SV-552 26
7.3.3 Connecting the SV-306 Wall Plate to the SV-552 (Optional) 27
8 Wiring the TP Line In/Line Out Connectors 28
8.1 Wiring the Twisted Pair RJ-45 Terminals (U.S.) 28
8.2 Wiring the Terminal Block (England and Europe) 29
8.3 Cabling for the SV-306 and SV-307 30
9 Grounding the Wall Plate 30
PART IV Further information 32
10 Customizing the Controllers' Buttons and Labels 32