Kramer Electronics SV-551ALC - Manual (Page 5)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
PART I Your SummitView™ System
PART I describes the SummitView™ system and its devices
3 Overview
We have designed a complete and simple solution for the integration of media and
control in classrooms, training rooms and presentation rooms. SummitView™ is as
easy to use as it is to specify and install. The components that make up the
SummitView™ system are available as either standalone products or as a Kit with
everything included - wall plates, room controllers, amplifier, speakers, cable and
enclosures ready to be mounted to projection mounts is included. With
SummitView™ you get everything you need for a high end integrated media system –
just add the displays and sources. All the signals are transmitted over economical
CAT 5 cable and switched using the SV-551 Switcher/Processor. The
SummitView™ System controlled via the network is everything you need from the
company you can count on for quality products and the ultimate in customer support –
Kramer Electronics.
The SV-551 ALC version is aimed at installers who prefer to design their own
SummitView installations. The SV-551 ALC kit differs from the standard SV-551
kit only in regards to the contents of the box.
3.1 Your SummitView™ Essentials Kit and SV-551 ALC
This section defines the SummitView™ Essentials Kit and the SV-551 ALC box
contents.
The SummitView™ Essentials Kit contains:
• SV-551 Processor/Switcher
• RC-63DL Room Controller
• SV-301 and SV-302 Wall Plate Devices
• SPK-CC444 Speakers (ordered separately)
• Required cables (for full details see Section 9 )
• Check List (see Table 14 )
• Screwdrivers (provided with the RC-62, RC-63 and SV-551)
The SV-551 ALC kit contains:
• SV-551 Processor/Switcher
• Reduced cable set (for details, see Section 9 )
The following additional products are available for purchase (optional):