Kramer Electronics FC-10Dxl - Manual (Page 5)

Overview
3
3 Overview
The FC-10Dxl is a high-performance video format converter for composite and
s-Video (Y/C) signals. The unit converts a composite video or s-Video input
through a digital comb filter to a composite and s-Video (Y/C) or component
(YUV/RGB 1 ) video output.
The FC-10Dxl features:
Selectable inputs - one composite (RCA connector) and one s-Video (4-pin
connector)
Format conversion - Transcodes composite video and s-Video to component
video, RGB 1 , or composite video and s-Video
One component video output and one composite video output on RCA
connectors, as well as one s-Video output (on RCA connectors/4-pin
connector)
A front panel input select button and an output format select button
A contact closure remote input select terminal block connector
3D comb filtering for best quality color separation
PAL/NTSC compatibility
Compact size. Two units can be rack mounted side-by-side in a 1U rack
space with the optional RK-1 rack kit
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality
Position your Kramer FC-10Dxl in a location free from moisture and away
from excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 2 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Defined as RsGsBs (that is, there is sync on all three components of the RGB outputs)
2 For example: model number AD2512C, part number 2535-000251