Kramer Electronics 650T - Manual (Page 7)

4 650T/650R - Overview
3 Overview
This section describes the:

650T DVI-Coax Transmitter, see Section
3.1

650R Coax-DVI Receiver, see Section 3.2
3.1 650T DVI-Coax Transmitter
The Kramer DigiTOOLS
®
650T is an DVI-coax transmitter that receives an DVI
signal, codes it, and transmits red, green, blue, clock and data signals, as well as
power, infrared and RS-232 control signals over coax cable to the 650R receiver.
Compatible with a Kramer transmitter and via a Kramer external remote IR receiver:
C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE.
The 650T features:

A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel) and up
to 720P with HDCP

Digital signal transmission without compression or conversion

HDTV compatibility and HDCP compliance

EDID pass-through that passes the EDID between the source and display

Bi-directional IR (Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE)
and RS-232 interfaces
IR and RS-232 data is available only when using a 5-plug coax cable and the power
coax line is connected.

Power feeding to the 650R

Plug and Play installation with no adjustments