Kramer Electronics 690T - Manual (Page 5)

2 690T, 690R - Getting Started
2 Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•
Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•
Do not secure the cables in tight bundles or roll the slack into tight coils
•
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•
Position your Kramer product away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
The customer can replace any SFP module with a standard SFP
module but Kramer guarantees correct operation only with Kramer
supplied modules.
SFP modules must be of the same type: either MSA or non-MSA.
Only modules Laser Class I acc. 21 CFR 1040 and Class 1 per IEC
60825-1 are allowed in this product.
i
!
i
i
i