Kramer Electronics PT-101DP - Manual (Page 10)

PT-101DP - Connecting the PT-101DP 7
5 Connecting the PT-101DP
Always switch off the power to each device before connecting it to your
PT-101DP. After connecting your PT-101DP, connect its power and
then switch on the power to each device.
To connect the PT-101DP, as illustrated in the example in Figure 2 , do the
following:
1. Connect the DisplayPort source (for example, a computer graphics source)
to the INPUT connector.
2. Connect the OUTPUT connector to a DisplayPort acceptor (for example, a
DisplayPort display).
3. Connect the 5V DC power adapter to the power socket on the PT-101DP
and connect the adapter to the mains electricity.
Figure 2: Connecting the PT-101DP DisplayPort Repeater
i