3 connecting the rs-232 port, Connecting the rs-232 port, Figure 7 – Kramer Electronics TP-125EDID User Manual
Page 22
Advertising
TP-121/3/5EDID, PT-110EDID - Your TP-125EDID
19
Figure 7: Connecting the TP-125EDID XGA/Audio/Data Line Transmitter
6.3
Connecting the RS-232 Port
To control an RS-232 controllable remote device from a PC or RS-232 controller,
prepare an RS-232 cable with a 9-pin D-sub connector at one end, and a 3-pin
terminal block connector at the other end, as shown in
Advertising
This manual is related to the following products: