Kramer Electronics PT-572HDCP+ - Manual (Page 10)

PT-571HDCP/PT-572HDCP+ - Defining the PT-572HDCP+ DVI Line Receiver 7
7
5 Defining the PT-572HDCP+ DVI Line
Receiver
The Kramer Pico TOOLS PT-572HDCP+ DVI Line Receiver receives an encoded
signal over a CAT 5 cable transmitted from the PT-571HDCP, decodes it, and
converts it to a DVI output.
The PT-572HDCP+ has:

A DVI output connector

An RJ-45 CAT 5 input connector

One power status LED
Figure 2: PT-572HDCP+ DVI Line Receiver
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 DVI OUT Connector Connect to the DVI acceptor
3 IN RJ-45 Connector Connect to the OUT RJ-45 connector on the PT-571HDCP
4 ON LED Lights red when receiving power only, orange when output
and power are attached, and yellow when both an active
input and output are attached