Kramer Electronics TP-200AXR - Manual (Page 5)

Overview
3
3
3 Overview
This section describes:
• The TP-100AXR PC/Audio Line Transmitter, see section 3.1
• The TP-200AXR PC/Audio Line Receiver, see section 3.2
• The power connect feature, see section 3.3
• Using shielded twisted pair (STP)/unshielded twisted pair (UTP),
see section 3.4
• Recommendations for achieving the best performance, see section
3.5
3.1 Your TP-100AXR PC/Audio Line Transmitter
The TP-100AXR is a PC/audio stereo line transmitter that receives a PC
signal and an unbalanced stereo analog audio signal and transmits them over
CAT 5 cable to up to two TP-200AXR receivers, converting the unbalanced
stereo analog audio signal to digital audio (S/PDIF) stream before
transmitting, thus preserving the quality of the audio signal. In particular,
the TP-100AXR features:
• Resolution up to and including WUXGA
• HDTV compatibility
• Looping inputs that allow connection of a local display and audio
acceptor
• A transmission range of more than 300 ft (more than 100 meters),
and a 20kHz audio bandwidth with an S/N ratio that exceeds 80dB
on the same transmission range
• The Power Connect™ feature that can power both units over the
CAT 5 cable
• 12V DC power
3.2 Your TP-200AXR PC/Audio Line Receiver
The TP-200AXR is a PC/audio line receiver that receives the coded CAT 5
signal transmitted by a TP-100AXR, decodes it and converts it to two PC,
stereo analog and S/PDIF digital audio outputs. The TP-200AXR, with a
TP-100AXR, allows an operation range of more than 300 ft. (more than
100 meters) over standard CAT 5 cable.
In addition, the TP-200AXR:
• Provides high resolution up to WUXGA
• Is HDTV compatible