Kramer Electronics TP-330FW - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting FireWire Devices via Two TP-330FW Units
6
5 Connecting FireWire Devices via Two TP-330FW Units
To connect two FireWire devices via two TP-330FW units over an extended
distance as shown in the example in Figure 2 :
Figure 2: Connecting FireWire Devices via Two TP-330FW Units
1. On the first TP-330FW connect the FireWire device (for example, a video
camcorder) to FW PORT 1 or FW PORT 2.
2. On the second TP-330FW connect the FireWire device (for example, a
computer workstation) to FW PORT 1 or FW PORT 2.
3. Connect the two TP-330FW units together via the CAT 5 PORTs on the rear
panel using STP/UTP cable with a maximum length of 100m (328ft).
4. Connect the first 12V DC power adapter to the first TP-330FW and to the
mains supply.
5. If more than 50m (164ft) away from the first TP-330FW—connect the
second 12V DC power adapter to the second TP-330FW and to the mains
supply.