Kramer Electronics TP-43 User Manual
Page 12
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-43 Component – S/PDIF Transceiver
8
5.2 Connecting an Extended Component – S/PDIF Distribution
System
To configure a
TP-41 / TP-42 / TP-43 extended Component – S/PDIF
distribution system (up to 1200ft (400m)), as the example in Figure 6
illustrates:
1. On the
TP-41, connect the:
Y, U, and V RCA INPUT connectors and the S/PDIF (digital
audio) RCA INPUT connector to a component source (for
example, a DVD player)
LINE OUT connector
1
to the LINE IN connector
1
of the first
TP-43
2. On the first
TP-43, connect the:
Local Output A: Y, U, and V RCA (component video)
OUTPUT connectors to a component acceptor (for example,
a plasma display), and the S/PDIF (digital audio) RCA
OUTPUT connector to an AV Receiver
LINE OUT connector
1
to the LINE IN connector
1
of the
second
TP-43
3. On the second
TP-43, connect the:
Local Output B: Y, U, and V RCA (component video)
OUTPUT connectors to a component acceptor (for example,
a plasma display), and the S/PDIF (digital audio) RCA
OUTPUT connector to an AV Receiver
LINE OUT connector
1
to the LINE IN connector
1
of the third
TP-43
4. On the third
TP-43, connect the:
Local Output C: Y, U, and V RCA (component video)
OUTPUT connectors to a component acceptor (for example,
a plasma display), and the S/PDIF (digital audio) RCA
OUTPUT connector to an AV Receiver
LINE OUT connector
1
to the LINE IN connector
1
of the
TP-42
1 Via CAT 5 cabling with a maximum range of up to 300ft (100m)