DuraVent DVL Installation User Manual
Page 7
7
or soot has built up. If creosote or soot has
accumulated, it should be removed to reduce
the risk of chimney fire.
3.
Have your connector and chimney
cleaned by a professional chimney sweep if
you have doubts about your ability to clean it.
Use a plastic, wood or flexible steel brush.
4.
When burning Coal clean the chimney
thoroughly within 48 hours of shutting down
the stove for the season. Check the chimney
lining for sulfuric acid corrosion regularly.
5.
Do not use chemical chimney cleaners.
Their use does not eliminate the need for
mechanical cleaning and they may be highly
corrosive.
6.
If a flue fire occurs, close all appliance
draft openings and call your Fire Department.
Do not use the chimney again until it is
inspected for possible damage.