WIKA OLS-C20 - Manual (Page 4)

4 WIKA operating instructions mini limit switch, model LSO.02
13334591.02 10/2010 GB/D/F/E
GB
1. General information
1. General information
■ The mini limit switch described in the operating instructions has been manufactured
using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the mini limit
switch. Working safely requires that all safety instructions and work instructions are
observed.
■ Observe the relevant local accident prevention regulations and general safety
regulations for the mini limit switch's range of use.
■ The operating instructions are part of the instrument and must be kept in the immediate
vicinity of the mini limit switch and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions,
prior to beginning any work.
■ The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the mini limit switch.
■ The general terms and conditions contained in the sales documentation, shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: LM 31.01
- Application concultant: Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: [email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation, which can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation, which can result in light injuries
or damage to equipment or the environment, if not avoided.