Gb 1. general information 1. general information – WIKA BCS10 User Manual

Page 4

Advertising

WIKA operating instructions calibration system, model BCS10

14051046.01 10/2012 GB/D/F/E

1. General information

■

The pressure transmitter described in the calibration instructions has been designed

and manufactured using state-of-the-art technology. All components are subject

to stringent quality and environmental criteria during production. Our management

systems are certified to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instru-

ment. Working safely requires that all safety instructions and work instructions are

observed.

■

Observe the relevant local accident prevention regulations and general safety regula-

tions for the instrument's range of use.

■

The operating instructions are part of the product and must be kept in the immediate

vicinity of the instrument and readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instructions

prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the

product contrary to its intended use, non-compliance with these operating instruc-

tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-

cations to the instrument.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modifications.

■

Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with

international standards.

■

Further information:

- Internet address:

www.wika.de / www.wika.com

- relevant data sheet:

SP 60.08

- application consultant:

Tel.:

(+49) 9372/132-8971

Fax:

(+49) 9372/132-8008971

Advertising