Winland Electronics MTA-1 - Manual (Page 2)

Operation and Testing Procedures
To manually activate the MTA-1 for testing, loosen the locknut of one limit post and slide
it toward the temperature indicator until it makes contact and temporarily tighten the
locknut nut. If installed correctly, this test procedure should activate the warning device to
which the MTA-1 is connected. After testing, loosen the locknut, return the limit arm to it
original set point and tighten the locknut. The same test procedure should also be repeated
with the second limit arm to verify proper operation.
TA-1
Single output temperature monitoring
•
No power required to operate
• 50 to 130° F alarm range
• N.O. dry contacts
• Not for use in coolers and freezers
TA-2HL
Dual output temperature monitoring
•
No power required to operate
• 50 to 130° F alarm range
• N.O. dry contacts
• Not for use in coolers and freezers
TA-40
Single output temperature monitoring
•
No power required to operate
• N.C. above 40° F
• Not for use in coolers and freezers
I
MPORTANT
:
Do not use the MTA-1 in a cooler or freezer. Frost buildup and moisture
can cause the unit to malfunction. For cooler & freezer applications,
use an EnviroAlert® device with a remote probe.
To insure proper operation, test weekly. O
NE
Y
EAR
L
IMITED
W
ARRANTY
Winland Electronics, Inc. (“Winland”) warrants to the end user/purchaser that each product of its manufacture shall
be free from defects in material and factory workmanship for a period of one year from the date of purchase, when
properly installed and operated under normal conditions according to Winland’s instruction.
Winland’s obligation under this warranty is limited to correcting, without charge, at its factory any part or parts thereof
which shall be returned to the factory, by the original purchaser, transportation charges prepaid, within one year of the
date of purchase and which upon examination, shall disclose to Winland’s satisfaction to have been originally defective.
Correction of such defects by repair to, or supplying replacements for, defective parts shall constitute fulfillment of all
Winland’s obligations to purchaser under this limited warranty. Repair service performed by Winland after one year
from date of purchase will be for a reasonable service charge.
This limited warranty shall not apply to any of Winland’s products which have been subject to misuse, negligence
or accident or which have been repaired or altered outside of Winland’s factory. The warranty is void if the Product’s
housing or cover is removed.
Winland shall not be liable for loss, damage or expense resulting, directly or indirectly, from the use of its products or
any other cause.
This warranty shall be null and void in its entirety if: (i) the product is altered or modified in any way that is not
consistent with the manufacturer’s instructions, or (ii) the product is used with or connected to a device: (a) that
such product is not intended to be used with or connected to, (b) is not otherwise consistent with the manufacturer’s
instructions, or (c) is not otherwise approved by the manufacturer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES, NON-INFRINGEMENT AND TITLE, AND ANY
WARRANTIES ARISING FROM COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE. ALL OTHER REPRESENTATIONS
MADE TO THE END USER/PURCHASER BY ANY OTHER PARTY ARE ALSO EXCLUDED.
WINLAND SHALL NOT BE LIABLE TO ANY PERSON FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY DESCRIPTION, WHETHER ARISING OUT OF WARRANTY OR OTHER CONTRACT, NEGLIGENCE OR OTHER TORT, OR
OTHERWISE. Under no circumstances shall Winland’s liability under this limited warranty exceed the purchase price
paid by the end user/purchaser for the product.
No person, agent or dealer is authorized to give warranties on behalf of Winland nor to assume for Winland any other
liability in connection with any of its products.
EnviroAlert® EA200
Dual Zone Wireless Electronic Monitor:
Temperature, Humidity, Water Presence
EA200-12 (12VDC) and EA200-24 (24VDC)
Has one built-in ambient temperature probe
Connect up to 1 wired probe
EnviroAlert® EA400
Four Zone Wireless Electronic Monitor:
Temperature, Humidity, Water Presence
EA400-12 (12VDC) and EA400-24 (24VDC)
Connect up to 4 wired probes
EnviroAlert® EA800
Eight Zone Wireless Electronic Monitor:
Temperature, Humidity, Water, Closed Contact, 4-20mA
Connect up to 4 wireless and up to 4 wired probes
Automatic data logging transferable via USB stick
Probe data
Event and alarm history
EnviroAlert® EA800-ip
Eight Zone Wireless Electronic Monitor:
Temperature, Humidity, Water, Closed Contact, 4-20mA
Connect up to 4 wireless and up to 4 wired probes
Remote access via wired IP connection to
Programming and real-time data viewing
Probe data as well as alarm and event logs
WEEE Product Recovery/Recycling for EU Customers
In an effort to improve waste management in the European Union, the European Union has enacted directive
2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). According to the WEEE Directive, Winland
Electronics must take back waste electrical or electronic equipment covered under the WEEE Directive, at its cost, for
all product it puts on the market after July 1, 2006. The Return Process: Contact Winland at www.winland.com.
Applicable Directives
RoHS Directive 2002/95/EC; WEEE Directive 2002/96/EC
Statement of Compliance:
Winland Electronics, Inc. hereby declares this device is in compliance with all the applicable Directives 2002/95/EC,
2002/96/EC. This device is considered a passive EM device and is thereby excluded from the scope of the EMC directive
89/336/EEC and Low Voltage Directive 73/23/EEC.
Symbols on the Product or Manual Labeling
For product disposal, ensure the following:
• Do not dispose of this product as unsorted municipal waste.
• Collect this product separately.
• Use collection and return systems available to you.
WEEE Waste Electrical and Electronic Equipment
RoHS Restriction of Hazardous Substances