Next Advance Gold 24-AU - Manual (Page 6)

Operator’s Manual for the Bullet Blender
®
Gold
SPECIFICATIONS
Size: 35 cm (14 in.) deep x 46 cm (18
in.) wide x 38 cm (15 in.) high.
Weight: 30 lbs.
Power Requirement: 100-240 V, 50-60
Hz, 2.5-4.5 A
Capacity: 24 of 1.5 mL RINO
®
tubes or
Eppendorf
®
Safe-lock
®
tubes.
Relative Humidity: 5 - 90% non-
condensing
Operating Temperature: 4 - 40°C
Altitude: <2000m
Storage Temperature: -40 to 50°C
Meets requirements (-CE models
only).
WARRANTY
Next Advance warrants its Products
against defects in materials and
workmanship for time periods which
vary according to the Product. Within
these time periods, Next Advance will
replace or repair, without charge to the
original purchaser, any part which is
defective.
Bullet Blender Two years
The warranty is void if the Product
is defective due to product accident,
product modification, exposure to
radiation other than for sterilization,
connection to an improper electrical
supply, lack of proper maintenance,
contamination, improper installation or
misuse. If the product is used in a
manner not specified by the
manufacturer, the protection provided
by the equipment may be impaired. The
warranty shall also not apply to defects
arising from fire, flood, lightning or
other conditions unrelated to correct
operation of the Product.
Next Advance’s liability is limited,
at the company’s election, to (1) refund
of the original purchaser’s purchase
price for the Product (2) repair of the
Product, or (3) replacement of the
Product or defective parts. Evidence of
purchase by the original purchaser is
required. Next Advance may also
request documentation of proper
maintenance, if applicable.
Next Advance makes no other
warranty, express or implied, with
respect to its Products. NEXT
ADVANCE MAKES NO
WARRANTY RESPECTING THE
MERCHANTABILITY OF THE
PRODUCTS OR THEIR
SUITABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE OR
USE. Next Advance shall not be liable
for, indirect, special, incidental or
consequential damages of any nature.
Any recovery for any claim shall be
limited to the original purchase price
for the product.
Operator’s Responsibility
Provide proof of purchase and provide
normal care and maintenance.
WARNINGS AND CAUTIONS
Read the user’s manual before
operating.
6