Cirrus Logic CDB42L73 - Manual (Page 19)

DS882DB1 19
CDB42L73
4.3.6 Digital Mixer 1 Tab
The “Digital Mixer 1” tab contains the main controls for setting the digital mixing/routing options for all three
serial ports of the CS42L73. A brief description of each control group is described below.
• To XSP Output - register controls to configure the mix of all the input signals to the Auxiliary Serial Port
• To VSP Output - register controls to configure the mix of all the input signals to the Voice Serial Port
• To ASP Output - register controls to configure the mix of all the input signals to the Audio Serial Port
• XSP, VSP Mono Output Options - register controls to select either stereo or dual-mono mode for the
Auxiliary and Voice Serial Port outputs
• Refresh Page - reads all registers in all devices and updates the values in the GUI
• Reset CS42L73 - resets the CS42L73
Figure 11. The “Digital Mixer 1” Tab in FlexGUI for the CDB42L73