Cirrus Logic AN348 - Manual (Page 6)

AN348
6 AN348REV2
Our workspace or canvas now looks like this:
Let us return to the Schematic page now. We will be using so-called fly-offs to connect elements between the Schematic and the
Processing page.
The creation of new fly-offs for the design's input and output signals is easy: Mark the first four input channels L, C, R, and Ls on
the Schematic page using your mouse. Then, change to the Wire mode using <CTRL>+<W>, left-click, hold and drag four wires
and then click the right mouse button. This will result in four blue labels. Double-click these to give them some individual names.
Apply the same procedure to the six output channels: L, C, R, Ls, Rs, and Lb.