Cirrus Logic CDB5460AU - Manual (Page 10)

CDB5460AU
10 DS487DBU1
If the Data from Disk item in the Setup menu is selected, a file selection window will appear as shown in
Figure 5. User can select a pre-saved data file for further analysis using time domain, FFT, and histogram
plots in Data Collection Window of the software.
Figure 5. Data from Disc File Selection Window
2.3.2 Menu Pull-down
Excluding the Start-Up window, the Menu pull-down provides 7 options: Setup Window, Calibration Win-
dow, Conversion Window, Pulse Rate Window, Data Collection Window, EEPROM Window, and Debug
Window. Each window provides a means to evaluate the different functions and performance of the
CS5460A. Each option has an associated function key (<F1>, <F2>, etc.). See Figure 6.
Figure 6. Menu Pull-down Options