Cirrus Logic CS5571 - Manual (Page 17)

CS5571
DS768PP1 17
3/25/08
10:56
3.6 Typical Connection Diagrams
The following figure depicts the CS5571 powered from bipolar analog supplies, +2.5 V and - 2.5 V.
Figure 6. CS5571 Configured Using ±2.5V Analog Supplies
VREF-
VREF+ +4.096
Voltage
Reference
(NOTE 1)
ACOM
AIN
+2.5 V
SMODE
CS
5 SCLK
5 SDO
RDY
CONV
MCLK
DITHER
RST
BP/UP
1. See Section 3.3 Voltage Reference for information on required
voltage reference performance criteria.
2.Locate capacitors so as to minimize loop length.
3. The ±2.5 V supplies should also be bypassed to ground at the converter.
4. VLR and the power supply ground for the ±2.5 V should be
connected to the same ground plane under the chip.
5. SCLK and SDO may require pull-down resistors in some applications.
NOTES
-2.5 V
BUFEN
(V-) Buffers Off
(V+) Buffers On
10 µF 0.1 µF
V1+
V2+
V1-
V2-
VL
VLR
DCR
+2.5 V +3.3 V to +1.8 V
0.1 µF
0.1 µF
X7R
0.1 µF
10
49.9
150pF
2k
4700pF
C0G
-2.048 V
+2.048 V
0 V
-2.5 V
CS5571
TST
10
0.1 µF
50
VLR2