EasyN H3 Series Central Management System - Manual (Page 10)

MVH3E-E-2.0.1.7 - 9 -
：
【 Connected All 】 connect device in selected area
【 Disconnected All 】 disconnect device in selected area
【 Arm All 】 devices in selected area arm
【 Disarm All 】 devices in selected area disarm
【 Start Manual Record of Area 】 enable manual record in selected area
【 Stop Manual Record of Area 】 disable manual record in selected area
【 Main Stream All 】 connect device with main stream in selected area
【 Sub Stream All 】 connect device with sub stream in selected areaIf device is in
connection, it should be disconnected then reconnect, then the stream changes to
sub stream, otherwise, it is still in main stream.
【 Auto Adjust All 】 device in selected area auto adjusts view proportion
【 Full Display All 】 device in selected area adjusts image proportion according to
the size of window of multi-picture view.
【 Check Time All 】 device in selected area synchronize time with PC.
Notice: Please double click Channel 01 below device or drag Channel 01 to
window to view video.
Select one device; right click on Channel, pop-up dialog as:
【 Connect 】 connect one channel of selected device, only support Channel 01
presently.
【 Start Manual Record 】 enable manual record for selected channel, label auto
changes into label of disable-manual-record label.
【 Main Stream 】 connect device with main stream, on tick means current selection
is main stream.