EasyN NR-1-B Series - Manual (Page 34)

34
3、Hard Disk Sleep
Enter the “Main Menu” and select “Hard Disk Management”. Select the hard disk
which you will put into sleep status and click “Sleep”.
4、Hard Disk Remove
Enter the “Main Menu” and select “Hard Disk Management”. Select the hard disk you
will remove and click “Remove”.
15、System Maintainance
1、Log
Right click the “Main Menu”, and select “Maintain”. Then select “Log View” to
review log according to “Log Type”, “Alarm Log”, “Error Log” and “Operate Log”. As
shown in the following figure: