EasyN NR-1-B Series - Manual (Page 5)

5
2、Hard Disk Installation
Notice
Please install DVR-specific hard disks recommend by our company.
ND-4-1HI series can install a maximum of 1 hard disk.
ND-4-2HI series can install a maximum of 2 hard disks.
Please make sure the device is turned off before installation.
Installation Tool: Phillips screwdriver
ND-4-1/2HI series hard disk installation procedure:
1. Unscrew the nuts on the rear panel and then take off the chassis cover.
2. Put the hard disk in the chassis, and then fix it on the hard disk bracket using
the screwdriver.
3. Connect one end of the hard disk cable to the main board and the other end to
the hard disk, and then connect power cable to the hard disk.