iRobot Mint 5200 - Manual (Page 20)

PAGE 20
Operating Mint Plus
Place the NorthStar ® Cube
Press the button on the back corner of
the NorthStar Navigation Cube to turn it
on. A blue light will flash on the opposite
corner when turned on, and then go solid
when Mint Plus locks onto it.
If you forget to turn the Cube on, Mint Plus
will send a signal to try to turn it on. If Mint
Plus is successful, the blue flashing light will
appear on the Cube.
Place the NorthStar Navigation Cube on a
table or counter top, pointing the blue light
away from walls and toward the middle of
the room.
For Best Results
Place the NorthStar Navigation Cube where it has a clear view of the ceiling
(for example, no cabinet or shelf directly above it).
Do not move the NorthStar Navigation Cube once Mint Plus has started cleaning
as it may impair Mint Plus’s cleaning performance.
Do not put the NorthStar Navigation Cube on the floor as the cleaner may run
into it and move it.