iRobot Scooba 390 Series - Manual (Page 21)

Scooba's Tank
Scooba's tank is completely removable from the robot base. Scooba has a
unique two-chamber tank design that ensures fresh cleaning solution never
mixes with the dirty water Scooba picks up as it cleans.
Clean Tank
The Clean tank holds the Clorox®Scooba cleaning solution and water that
Scooba uses to clean the floor. Before each use, the Clean tank is filled with
water and 1 measuring cup (1-1/2 oz.) of Clorox®Scooba cleaning solution.
Fill the Clean tank before cleaning with Scooba.
CAUTION: Fill with cold or luke-warm water only. Do not fill Scooba’s tanks with hot water.
CAUTION: USE ONLY APPROVED CLEANING SOLUTIONS. Clorox® Scooba
cleaning solution is specially formulated for Scooba. Other solutions may damage
Scooba, causing corrosion of electronic parts, excessive foaming, and poor traction.
Use of other solutions will void the warranty. See page 14 for details.
www.irobot.com 11
Scooba's Tanks
10 iRobot Scooba Owner's Manual
Charging Scooba
Scooba’s Power
Button Light
Battery Status
Red Battery empty
Green pulse Charging
Green fast pulse
16-hour refresh
charge
Solid green Fully charged
Blinking red
Battery not
installed
Slowly fill the remainder of
the Clean tank with warm
or cold tap water. Tilt the
tank back and ensure it is
completely filled to the top. Push the Clean tank cap
closed and place tank
back in robot. Push firmly on tank until
you hear an audible click.
Press handle to remove
tank. Remove tank from robot
base. Using the included
measuring cup, measure
and pour Clorox®Scooba
cleaning solution into the
Clean tank.
Removing the Battery from Scooba:
Grip the battery, making sure to push the release tab, then rotate up.
Push release tab Rotate battery up
Charging Scooba
Charge Scooba's battery by plugging the power supply into Scooba.
TIP: Always make sure that the green power light of the power supply is ON while
plugged into the wall.
Battery
Release
Tab