Charging and installing the battery – iRobot Looj User Manual

Page 6

Advertising
background image

10

iRobot Looj Owner’s Manual

www.irobot.com

11

battery tips

• Remove all batteries and store in a cool dry place when not in use.
• Do not leave battery charging for more than 24 hours. Doing so may

decrease battery life.

• The battery naturally looses charge while being stored. After storing

for a season without charging, you will need to recharge the battery
for 24 hours prior to using.

• Battery life can be improved by only charging the battery when it is

fully depleted. See

www.irobot.com/support for more details on the

Looj batteries and charging.

Charging and Installing the Battery

Before you use Looj, charge the included
7.2V battery pack for 24 hours.

Looj batteries are designed to power
Looj through 150 linear feet of gutter
on a single charge, including the time to
drive Looj back and forth during cleaning.

Do not leave Looj’s battery plugged into
the charger for more than 24 hours, as it
may reduce the battery life.

For long term storage, iRobot recommends
that the battery be fully charged then
removed from the robot and stored in a
cool, dry place.

to install battery pack:

1. Loosen screws and remove

battery door

2. Make sure the battery end caps are on

the battery. The end caps ensure a tight
fit of the battery into the compartment.

3. Connect the battery connector to the

connector inside the robot’s battery
compartment and insert the battery
into the robot battery compartment

Advertising