KWorld Kanvus Office 54 - Manual (Page 33)

32
(3) Reserve Edges
Tap on the “Reserve Edges” button to
allocate spaces for the tablet’s
hotspots.
(4) Pen Area Dimensions
This indicates the current height and width of
the Pen Area Dimensions. Enter new values
here if you wish to change the dimensions of
the pen area.
(5) Pen Area Offset
This indicates the horizontal and vertical distances from the upper left corner of the Pen Area to the
upper left corner of the maximum Pen Area. Enter new values by typing in numbers or clicking the
up / down arrows if you wish to adjust the offset distance.