KWorld Kanvus Office 54 - Manual (Page 7)

6
Tablet
Refer to the picture below.
Descriptions
○
1
— USB Connector : Connect to a USB port on your PC.
○
2
— Working Area : Please refer to Working area section for detail descriptions.
○
3
— LED Indicator : The green LED light on the tablet is the main indicator for hardware
operation. This LED normally stays off, and will only be turned on/off in response to certain
conditions. Pay attention to the states of the LED when you are encountering the following
situations :
(a) A built-in power saving function would execute the power saving mode for the pen if it
is left unused for a period of time. Tap anywhere on the surface with the tip of the pen
to “wake it up” if it has gone into power saving mode.
Working Area
LED Indicator
Hotspot Area
USB Connector