Akai Ewi4000s - Manual (Page 35)

33
RESTORING THE FACTORY PRESETS
By turning the EWI4000s on while holding the LEVEL, FX, SETUP, and TRANS BUTTONS, the EWI4000s,
you can restore the EWI4000s’s factory preset configuration.
The following global settings are stored in the
EWI4000s:
dL: Key delay: 07
CH: Midi channel: 01
tu: Tune: 40
bS: Breath Sensor: Aftertouch, breath,
and velocity enabled
vS: Vibrato Sensor: Pitch Bend enabled
vE: Velocity: 120
Po: Portamento: CC #5 (Pedal Switch off)
Oc: Octave key: oc
Ho: Hold key: OF
GL: Glide: r
Level master: 30
Level preset: 30
Reverb master: 21