MSI X99S MPOWER Manual - Manual (Page 45)

Chapter 1
1-31 Getting Started
POWER1: Power Button
This button is used to turn-on and turn-off the system. Press the button once to turn-on
or turn-off the system.
RESET1: Reset Button
This reset button is used to reset the system. Press the button to reset the system.
Re
se
t
SW-TACT1, SW-TACT2: Base Clock Control Buttons
These buttons are used to increase or decrease the base clock frequency. Pressing
the Plus/ Minus button once will increase/ decrease the base clock frequency 0.1
MHz when the system is in regular operation state.
Plus button:
Base clock +0.1 MHz
Minus button:
Base clock -0.1 MHz